Yo-ho-ho. The wife and kids love the pirate life as well. They just search what they want on Radarr or Sonarr and it pops up on Jellyfin in a few minutes. We were spending around $200/no on services with a lot less choice and lower quality.
I did it with a raspberry pi 4 and direct installs. If I had it to do over again, I would have a more powerful small server and use docker inages. There are a lot of docker guides out there but I don’t have experience with it yet.
I had to do a bunch of complicated stuff like mounting my remote storage and such. I’ve been playing with Linux a long time. If you’re not experienced with Linux, I’d do docker.
You start getting setup with Usenet, gimme a holler and I’ll send you a drunken slug invite. It’s the best indexer I’ve found, and I think I’ve let all my other indexers lapse.
Do a bunch of reading before you start, before you purchase anything.
Lots of HDD storage. A 1080p movie is about 10GB so if you have an idea of how many movies/shows you want you can figure that out, but once you start I guarantee you’ll keep going so be sure you give yourself more room!
A device in your network connected to your router and is on 24/7 — I use a Synology NAS, but you could use a Rasperry Pi or a PC that you leave on. It’s much easier if it can run Docker!
You can start with torrenting if you want it to be 100% free, then if you like how it’s going and want much faster downloads and better availability you can dip into Usenet — I spend under $100 on an indexer and provider.
The most basic setup uses:
qBittorrent as the torrent downloader
Radarr as the movie manager
Sonarr as the TV show manager
Prowlarr as the indexer manager
Plex as the media server
Depending on how much you like tinkering with stuff, you can get into Usenet downloaders like sabnzb, requesting services like Overseer, notification services like Notifiarr… and more.
The easiest way to get going is with Docker and using docker-compose files when they’re provided in documentation.
Yo-ho-ho. The wife and kids love the pirate life as well. They just search what they want on Radarr or Sonarr and it pops up on Jellyfin in a few minutes. We were spending around $200/no on services with a lot less choice and lower quality.
Any good guides out there please on getting started with these…?
I did it with a raspberry pi 4 and direct installs. If I had it to do over again, I would have a more powerful small server and use docker inages. There are a lot of docker guides out there but I don’t have experience with it yet.
I had to do a bunch of complicated stuff like mounting my remote storage and such. I’ve been playing with Linux a long time. If you’re not experienced with Linux, I’d do docker.
You start getting setup with Usenet, gimme a holler and I’ll send you a drunken slug invite. It’s the best indexer I’ve found, and I think I’ve let all my other indexers lapse.
Do a bunch of reading before you start, before you purchase anything.
Best guide for it is by TRaSH.
Equipment-wise, you’ll want:
Lots of HDD storage. A 1080p movie is about 10GB so if you have an idea of how many movies/shows you want you can figure that out, but once you start I guarantee you’ll keep going so be sure you give yourself more room!
A device in your network connected to your router and is on 24/7 — I use a Synology NAS, but you could use a Rasperry Pi or a PC that you leave on. It’s much easier if it can run Docker!
You can start with torrenting if you want it to be 100% free, then if you like how it’s going and want much faster downloads and better availability you can dip into Usenet — I spend under $100 on an indexer and provider.
The most basic setup uses:
Depending on how much you like tinkering with stuff, you can get into Usenet downloaders like sabnzb, requesting services like Overseer, notification services like Notifiarr… and more.
The easiest way to get going is with Docker and using docker-compose files when they’re provided in documentation.