I’ve got several of these empty steel propane tanks from heating the chicken coop during the recent cold weather before I got an adapter to run the heater off of a larger refillable tank. Any ideas on what they could be repurposed for?

Seems like there should be some use for them besides tossing them in the recycling. I’d assume I’d need to poke a hole in them before recycling since they are/were pressure vessels.

I know there are adapters out there to refill them but now that I can use a larger, more easily refillable, tank I don’t really have any inclination to do so.

My only thought so far was to cut the top off, drill some holes, and make a little stick burning camp stove. But, that’s not something I’ll ever use.

I’ve got a fairly extensive workshop and metal working tools so pretty much everything is on the table. I can even do really shitty welding if required.

  • Chainweasel@lemmy.world
    link
    fedilink
    English
    arrow-up
    21
    ·
    edit-2
    6 days ago

    I refill and reuse mine, I got an adapter I can use a grill tank to fill them up with and take them camping for my lantern and camp grill

  • shalafi@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    4
    ·
    6 days ago

    I’d punch through the neck, fill with lamp oil, put candle wicks in there.

    I do that with cool bottles, but you could strip the label and paint, do something creative.

  • oo1@kbin.earth
    link
    fedilink
    arrow-up
    6
    ·
    6 days ago

    In my country if you get bottled gas supplied on contract, the cylinders usually remain the property of the supplier. They’d’ take them back and recycle, or the vendor should take them and pass them back.

  • 474D@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    6 days ago

    Turn it into a big ass flask, they can’t arrest you for drinking good 'ol clean burning propane, I tell ya hwat

    • xia@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      2
      ·
      6 days ago

      Given that alchohol could concievably be a fuel, you might have something there.

  • Dashi@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    6 days ago

    If you absolutely have a desire to do any of these artistic, repurpose or whatever with these: put them out 100 yards and put a bullet through the top of it to make sure there is no propane left in it

  • Brkdncr@lemmy.world
    link
    fedilink
    arrow-up
    63
    arrow-down
    3
    ·
    6 days ago

    Nothing. It’s why they are being phased out. recycle them at any place that sells propane tanks.

  • lennybird@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    2
    ·
    edit-2
    6 days ago

    Could you refill these with methane / biogas from an anaerobic digester? I assume you’d need a specialized compressor.

  • Canonical_Warlock@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    17
    arrow-down
    1
    ·
    6 days ago

    We always used them for target practice. They need to be punctured for disposal anyways, you know when you hit one, and They’re about the right size for sighting in on a 100yd range.

  • pepperprepper@lemmy.world
    link
    fedilink
    arrow-up
    3
    arrow-down
    1
    ·
    6 days ago

    My and my buddies get excited when we run out, we use them for target practice. More if a rifle thing where you can get some distance, they are rather unpredictable depending on how you hit it and if gas is still present.

    • seathru@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      4
      ·
      6 days ago

      I watched my dad set a forest on fire like that once. We got it out, but it was pretty intense.

  • highlow@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    6 days ago

    I used to shoot them with a 30-06. Unfortunately I never got one to go boom like the movies

    • Majorllama@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      6 days ago

      You have to tamper with the pressure release safety valves and provide a secondary flame unless you are using some bougie incendiary ammo (and even those aren’t a guarantee to ignite something like propane on its own).

      We used to blow up the normal sized ones like for your the backyard grill. We would fill the pressure release with valve with JB weld and then toss it into a bonfire and shoot it from like 500 feet away lol.

  • BakerBagel@midwest.social
    link
    fedilink
    arrow-up
    9
    ·
    6 days ago

    Under no circumstances should you puncture the container. It’s still a pressure vessel with flammable gas in it and will explode if you try.