I’ve been getting repeated emails from my ISP about “exceeding my bandwidth cap” and they feel very incorrect.

My current router is a Cisco RV260, and it doesn’t have a great way of tracking traffic. (There’s a port traffic screen that does give tx/rx bytes, but no way to see any date ranges).

Is there anything out there that can give an accurate account of Internet traffic? It would be nice if I could see destination domain/IPs, just for kicks and giggles, but an overall traffic count is all I really need.

Thanks!

  • TheOtherJake@beehaw.org
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Hey, I thought of mentioning, but got sidetracked and forgot. Most of the dozen or so consumer grade routers I have hacked around with seem to have less than optimal placement of DC stepdown converters located around the processor and radio circuit blocks. I mean, they appear to be optimised for radio as the primary design constraint, not for what is best for the DC converter operation. They tend to place electrolytic capacitors in close proximity to circuit blocks that get quite warm. I can’t say how often capacitors are creating problems, but it would not surprise me if this is the cause of many issues for many people after a year or two. I can say that I had problems with a cable company provided modem a few years ago. It had an obvious leaky cap and several that were around 25% out of spec, along with a couple identical parts that were around 5% out as I would expect with my typical shelf stock. Replacing all of them fixed the modem.

    • Naate@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      This is actually a great theory. I’ve fixed several monitors and TVs that were just bad capacitors. It’s a logical conclusion with these, too.