😭 I have two of those actively pulling out of my lathe and plaster walls. I don’t know how to fix it other than just take down the shelves, fully patch it, and never use that part of the wall again.
I should have gone with the plastic ones that reach out behind the thin plaster to grip on, because failure wouldn’t have destroyed the wall, but my dumb ass listened to the dude who told me the metal screw-in setbolt option was the superior option.
😯 Oh no! I’m so used to dry-wall/gypsum board that I forget that lath and plaster exists.
I’m not super familiar (just DIY) but, I think that you can make a patch that’s structural enough to take a new anchor. Definitely would need to be sure that there’s enough lath for our to hold onto and likely would want some fiberglass mesh tape to reinforce it.
Looks to be a bit of a pain (cleaning hole corners, using patching plaster and bonding agent, waiting for cure, etc). However, if done right, I think it would be sturdier than a typical patch in drywall.
Do consult someone who knows about the stuff though, like a professional plaster person or builder.
Haha wasn’t anything personal, or meant to make you feel any sort of way, just an old-school problem with modern tech exacerbation.
My house is 140 years old and modern advice doesn’t apply to most of it unfortunately. Every project ends up being a dozen more projects because nothing from then applies to now.
But I’ve learned. So if I choose to lathe and plaster my next house, well I can fix it, too, damnit.
Oof. Mine’s just under half that and I get that exactly. Went to replace an outdoor step about a month ago, just to discover that the deck wasn’t built to code and will need to be replaced. Everything is like that, either because the previous owner cut corners or the place is just old (like doorframes being out of square and changing by how much with the season).
Mmm I need to replace my rotted out front porch that is sagging and causing my front door to go out of square but it’s also not supposed to be part of the building at all technically…? I mean most of the additions to my house were never filed.… let’s just pretend that didn’t happen. And the rest of the omfg problem projects didn’t happen either…. The whole owning thing sucks.
😭 I have two of those actively pulling out of my lathe and plaster walls. I don’t know how to fix it other than just take down the shelves, fully patch it, and never use that part of the wall again.
I should have gone with the plastic ones that reach out behind the thin plaster to grip on, because failure wouldn’t have destroyed the wall, but my dumb ass listened to the dude who told me the metal screw-in setbolt option was the superior option.
😯 Oh no! I’m so used to dry-wall/gypsum board that I forget that lath and plaster exists.
I’m not super familiar (just DIY) but, I think that you can make a patch that’s structural enough to take a new anchor. Definitely would need to be sure that there’s enough lath for our to hold onto and likely would want some fiberglass mesh tape to reinforce it.
Looks to be a bit of a pain (cleaning hole corners, using patching plaster and bonding agent, waiting for cure, etc). However, if done right, I think it would be sturdier than a typical patch in drywall.
Do consult someone who knows about the stuff though, like a professional plaster person or builder.
Haha wasn’t anything personal, or meant to make you feel any sort of way, just an old-school problem with modern tech exacerbation.
My house is 140 years old and modern advice doesn’t apply to most of it unfortunately. Every project ends up being a dozen more projects because nothing from then applies to now.
But I’ve learned. So if I choose to lathe and plaster my next house, well I can fix it, too, damnit.
Oof. Mine’s just under half that and I get that exactly. Went to replace an outdoor step about a month ago, just to discover that the deck wasn’t built to code and will need to be replaced. Everything is like that, either because the previous owner cut corners or the place is just old (like doorframes being out of square and changing by how much with the season).
Mmm I need to replace my rotted out front porch that is sagging and causing my front door to go out of square but it’s also not supposed to be part of the building at all technically…? I mean most of the additions to my house were never filed.… let’s just pretend that didn’t happen. And the rest of the omfg problem projects didn’t happen either…. The whole owning thing sucks.