Perspectivist@feddit.uk to Mildly Infuriating@lemmy.worldEnglish · edit-29 days agoTried to carefully install the faucet immediately after gluing and caulking the sinkfeddit.ukimagemessage-square41fedilinkarrow-up1119arrow-down15file-text
arrow-up1114arrow-down1imageTried to carefully install the faucet immediately after gluing and caulking the sinkfeddit.ukPerspectivist@feddit.uk to Mildly Infuriating@lemmy.worldEnglish · edit-29 days agomessage-square41fedilinkfile-text
minus-squareNighed@feddit.uklinkfedilinkEnglisharrow-up3·8 days agoDepends on the angle of the flow out of the tap. I switched out a tap with an identical looking replacement, that just had a 20 degree or so andle on the plastic spout bit that made a huge difference.
minus-squaretyler@programming.devlinkfedilinkEnglisharrow-up2·8 days agoBut then you can’t use it with a low flow, for example to fill something slowly or carefully.
minus-squaremrgoosmoos@lemmy.calinkfedilinkEnglisharrow-up2·8 days agoI can’t think of a single time I would be trying to do that in a washroom sink
Depends on the angle of the flow out of the tap. I switched out a tap with an identical looking replacement, that just had a 20 degree or so andle on the plastic spout bit that made a huge difference.
But then you can’t use it with a low flow, for example to fill something slowly or carefully.
I can’t think of a single time I would be trying to do that in a washroom sink