developing countries don’t have enough infrastructure to benefit from wealth
It’s even worse: they only have the infrastructure to allow us to profit from their wealth. Colonial powers made sure the railroad between the mines and the ports are top notch, so their mineral riches can be carted off efficiently to the metropole.
China and other advanced nations prove that an export based economy can work though.
I will say that export driven economies are very difficult though. See Taiwan and their export of chips. It only works because Taiwan is basically modern Vulkans / Wizards who have chip technology that no one else in the world has.
A system of top level universities to build that kind of knowledge and infrastructure is difficult and outside the reach of most countries.
The machines are Dutch and the designs are made by the customer. The Taiwanese advantage is their government subsidised chip manufacturing. They aren’t wizards.
Global Foundries up in Buffalo, New York had the same exact Dutch equipment as them and couldn’t get past 12nm.
Taiwan / TSMC is hitting 3nm today (a feat that even Intel and Samsung cannot accomplish yet), and is well on its way to 2nm designs.
They’re fucking wizards who are 5+ years ahead of USA. Thank god they’re allies of us. But they’re severely kicking our ass in terms of yields, production, and even technology, using the same machines to ink smaller-and-smaller transistors to a degree impossible to us in the USA today.
The problem is by the time we figure out 3nm, TSMC will be at 2nm or better. They just consistently lead and are superior over us for the last 20 years or so.
nanometer is a marketing term now and doesn’t reflect actual sizes. Samsung were first with “3nm”.
America was doing “3nm” in 2018. You don’t seem to have any understanding of this issue.
From Wikipedia:
The term “3 nanometer” has no direct relation to any actual physical feature (such as gate length, metal pitch or gate pitch) of the transistors. According to the projections contained in the 2021 update of the International Roadmap for Devices and Systems published by IEEE Standards Association Industry Connection, a 3 nm node is expected to have a contacted gate pitch of 48 nanometers and a tightest metal pitch of 24 nanometers.
Also from Wikipedia:
South Korean chipmaker Samsung started shipping its 3 nm gate all around (GAA) process, named 3GAA, in mid-2022. On 29 December 2022, Taiwanese chip manufacturer TSMC announced that volume production using its 3 nm semiconductor node termed N3 is under way with good yields.
In early 2018, IMEC (Interuniversity Microelectronics Centre) and Cadence stated they had taped out 3 nm test chips, using extreme ultraviolet lithography (EUV) and 193 nm immersion lithography.
nanometer is a marketing term now and doesn’t reflect actual sizes. Samsung were first with “3nm”.
And iPhones chose TSMC’s 3nm, because TSMC is more than just 3nm, but also at a scale and price-point that Apple desires.
America was doing “3nm” in 2018
I’m talking about industry and manufacturing. Test labs doing one or two wafers back in 2018 doesn’t matter compared to the millions-of-chips that roll off of Taiwan’s production facilities.
No one in the USA can mass produce designs like this. Korea / Samsung is 2nd best, but still is slower at mass production than Taiwan.
Which brings us right back to my point. They aren’t wizards, they are simply benefiting from the enormous government investment into the extremely expensive chip manufacturing industry.
Their manufacturing efficiency is top tier, their government built facilities are top tier. However they weren’t first, they aren’t the only ones who can produce them and now that the US is interested in chip manufacturing again the new facilities will match TSMC in a few years.
We just invited the Taiwanese to stay in Arizona. I don’t expect Taiwan to give us their latest-and-greatest technologies. But this is still good for us in the great scheme of things.
But even USA’s #1 chipmaker, Intel, has fallen behind Taiwan. USA’s 3rd party manufacturer, GlobalFoundries, is 12nm and has no plan to go further. TSMC is still the only one who can help us with the CHIPS program, albeit by building a factory in Arizona but that’s still Taiwanese controlled technology.
The actual research that you’re giving Taiwan credit for is US research. There’s a reason the US was able to tell the Dutch government “You can’t allow this hardware to go to China.”
The basic research for the Extreme Ultraviolet lithography was done at US DOE labs as a hedge against Japan dominating the world semiconductor supply. The US allowed a few companies in as part of the EUV-LLC private-public partnership, and ASML ended up buying out the other players who had the licenses from the US. The EU certainly had a hand in the research after the test bed was built proving it could work. https://www.sandia.gov/media/ultra.htm
You can see this in painful clarity watching the Argentinian railroads. Created and operated by the UK originally, it has a clear shape of a funnel from all over the country towards the main port city, Buenos Aires.
That’s a general pattern though - sea transport is the most efficient, thus railroads will tend to integrate around important ports. It applies even in the UK.
It’s even worse: they only have the infrastructure to allow us to profit from their wealth. Colonial powers made sure the railroad between the mines and the ports are top notch, so their mineral riches can be carted off efficiently to the metropole.
China and other advanced nations prove that an export based economy can work though.
I will say that export driven economies are very difficult though. See Taiwan and their export of chips. It only works because Taiwan is basically modern Vulkans / Wizards who have chip technology that no one else in the world has.
A system of top level universities to build that kind of knowledge and infrastructure is difficult and outside the reach of most countries.
Export based <> extraction based
The machines are Dutch and the designs are made by the customer. The Taiwanese advantage is their government subsidised chip manufacturing. They aren’t wizards.
Global Foundries up in Buffalo, New York had the same exact Dutch equipment as them and couldn’t get past 12nm.
Taiwan / TSMC is hitting 3nm today (a feat that even Intel and Samsung cannot accomplish yet), and is well on its way to 2nm designs.
They’re fucking wizards who are 5+ years ahead of USA. Thank god they’re allies of us. But they’re severely kicking our ass in terms of yields, production, and even technology, using the same machines to ink smaller-and-smaller transistors to a degree impossible to us in the USA today.
The problem is by the time we figure out 3nm, TSMC will be at 2nm or better. They just consistently lead and are superior over us for the last 20 years or so.
nanometer is a marketing term now and doesn’t reflect actual sizes. Samsung were first with “3nm”.
America was doing “3nm” in 2018. You don’t seem to have any understanding of this issue.
From Wikipedia:
Also from Wikipedia:
And iPhones chose TSMC’s 3nm, because TSMC is more than just 3nm, but also at a scale and price-point that Apple desires.
I’m talking about industry and manufacturing. Test labs doing one or two wafers back in 2018 doesn’t matter compared to the millions-of-chips that roll off of Taiwan’s production facilities.
No one in the USA can mass produce designs like this. Korea / Samsung is 2nd best, but still is slower at mass production than Taiwan.
Which brings us right back to my point. They aren’t wizards, they are simply benefiting from the enormous government investment into the extremely expensive chip manufacturing industry.
Their manufacturing efficiency is top tier, their government built facilities are top tier. However they weren’t first, they aren’t the only ones who can produce them and now that the US is interested in chip manufacturing again the new facilities will match TSMC in a few years.
Erm… You know how we’re doing that right?
https://www.trendforce.com/news/2023/12/21/news-tsmcs-arizona-plant-rumored-for-q1-2024-trial-production-securing-orders-from-three-u-s-clients/
We just invited the Taiwanese to stay in Arizona. I don’t expect Taiwan to give us their latest-and-greatest technologies. But this is still good for us in the great scheme of things.
But even USA’s #1 chipmaker, Intel, has fallen behind Taiwan. USA’s 3rd party manufacturer, GlobalFoundries, is 12nm and has no plan to go further. TSMC is still the only one who can help us with the CHIPS program, albeit by building a factory in Arizona but that’s still Taiwanese controlled technology.
What Taiwanese technology? Name some.
Intel is building fabs, TSMC is moving away from Taiwan due to the geopolitical risks.
The actual research that you’re giving Taiwan credit for is US research. There’s a reason the US was able to tell the Dutch government “You can’t allow this hardware to go to China.”
The basic research for the Extreme Ultraviolet lithography was done at US DOE labs as a hedge against Japan dominating the world semiconductor supply. The US allowed a few companies in as part of the EUV-LLC private-public partnership, and ASML ended up buying out the other players who had the licenses from the US. The EU certainly had a hand in the research after the test bed was built proving it could work. https://www.sandia.gov/media/ultra.htm
You can see this in painful clarity watching the Argentinian railroads. Created and operated by the UK originally, it has a clear shape of a funnel from all over the country towards the main port city, Buenos Aires.
That’s a general pattern though - sea transport is the most efficient, thus railroads will tend to integrate around important ports. It applies even in the UK.