Trying to find out how difficult (or not) it will be to switch from iso layout to ansi. Main reason is the much better choice of keycaps that will be available.

Have any of you made the switch ? If so how difficult was it ?

  • codemonk@programming.dev
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    I switched from ISO to ANSI a few month ago. I touch type and I need German umlauts. Just as a background. This required me to find a layout that supports umlauts. I went with EurKEY. Overall, switching was easy. I do need a larger AltGr for umlauts but overall, switching was no big deal. I do like the shape of the return key on ANSI and that there are fewer keys right to my right pinky (on the home row). Typing umlauts is slightly less convenient, especially when capitalized, but not by much. Switching between ISO and ANSI and at the same time German layout and EurKEY is easy for me. Side note: I switched for the same reason (keycaps) and for writing code.

    • Waldhuette@lemmy.worldOP
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      1 year ago

      Nice to know. I’m also an ISO-DE user. I assume you use standard US ANSI keycaps and then in either the OS or Firmware you make the EurKEY binds for the modifiers ?

      So far I have been having US international in Windows Setup. Seems to work okay ish so far but I don’t type German that offen. Mostly coding and English.

      Different shape return needs getting used to and constantly mistake where the “?” Key and braces are.

      I will look into EurKEY thanks for the reply already.

      • codemonk@programming.dev
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I use Linux where EurKEY is available w/o extra install. On Windows, EurKEY can be installed as a layout. I use US ANSI keycaps. The good thing about EurKEY is that ‘ä’ is on AltGr-a, ‘ö’ on AltGr-o. Much easier to remember than US International, at least for German.

  • IAmCall3@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    I switched from the Italian layout to ANSI for the same reason, bought a Keychron and wanted more choice in keycaps.

    Honestly it wasn’t as difficult as I thought, it was like learning how to drive a different car after using the same one for years: some buttons are in different places but the thing itself works the same way.

  • vsis@feddit.cl
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Main reason is the much better choice of keycaps that will be available.

    That’s the problem with this hobby. I’m really used to ANSI ES and it’s a pain to get spanish keycaps. My solution was go for 40% and forget about what’s printed on keycaps.

      • vsis@feddit.cl
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Lots of layers and not having a problem with being slower. 40% is definitely not faster. It’s more ergonomic in my opinion, though.

  • N3Cr0@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I use US ANSI keyboards from time to time. Enter key and the keys behind it used to be quite some deal before I started adapting to it. Haven’t heard of EURkey yet, so I went with us-international. One thing that bothered me there though: There is no uppercase ßẞ.

        • Waldhuette@lemmy.worldOP
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          I guess could have figured that out. To be fair the lower case ß is big enough that it fits into full caps words like STRAßE. Imo not much difference to STRAẞE. But that’s subjective obviously and a fair complaint to miss that.

  • Kir@feddit.it
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I switched from iso to ansi a month ago. It has been easy, for the most part. I have to regularly use both ansi and iso (working laptop) and so far I’m having no problem mentally “switching” between layouts.

    The only thing I’m having some difficulty in are the dead keys, especially for the ’ and the é, which are pretty commons in my language.

  • cthonctic@kbin.social
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Another German software dev here, I switched from ISO-DE to ANSI with EurKey a couple months ago. Not on a Keychron but on a NuPhy which looks and feels better to me.

    Overall I’m quite happy with the switch and will only buy ANSI layouts going forward.@Waldhuette

    • Waldhuette@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Nice to hear that. Question is do I keep my iso de boards long term or will I exchange them for ANSI ones.

      • cthonctic@kbin.social
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        I suppose it depends on how easy of a time you have mentally switching back and forth between layouts. I do manage somewhat okay when leisurely typing on my Chromebook’s ISO layout keyboard. (as I am doing right now)

        But when I’m in a hurry or otherwise under a lot of mental load then all of the special characters being in different places than I’ve come to expect from using ANSI for work and at the PC… kinda sucks, not going to lie.

        I did keep my ISO Logitech MX Keys just in case but don’t really see myself buying anything but ANSI layout devices from here on out.
        Have to say though I would love to have a bigger that 1u right Alt key though because of all the EurKey shortcuts for äöü߀.

  • bulbz@lemm.ee
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Made the switch a few years ago for exactly the same reason m, it’s been so much easier to get boards and keycaps.

    It takes a little bit of getting used to but I’d say after like a month you’ll get used to it, main problem for me now is using ISO boards I tend to miss enter now lol

  • FirstWizardZorander@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Makes one wonder, why did ANSI become the de-facto standard in the mech keyboard community? Is it because of higher purchase power of US enthusiasts, or something else?

    From a volume standpoint, wouldn’t ISO make more sense?

  • Tatters@feddit.uk
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I switched from UK ISO to US ANSI last year, because of the far better choice of key caps. I missed not having a £ key, so I used Microsoft Keyboard Layout Creator to map Alt+3 to £.