Maybe I’m using the wrong terms, but what I’m wondering is if people are running services at home that they’ve made accessible from the internet. I.e. not open to the public, only so that they can use their own services from anywhere.

I’m paranoid a f when it comes to our home server, and even as a fairly experienced Linux user and programmer I don’t trust myself when it comes to computer security. However, it would be very convenient if my wife and I could access our self-hosted services when away from home. Or perhaps even make an album public and share a link with a few friends (e.g. Nextcloud, but I haven’t set that up yet).

Currently all our services run in docker containers, with separate user accounts, but I wouldn’t trust that to be 100% safe. Is there some kind of idiot proof way to expose one of the services to the internet without risking the integrity of the whole server in case it somehow gets compromised?

How are the rest of you reasoning about security? Renting a VPS for anything exposed? Using some kind of VPN to connect your phones to home network? Would you trust something like Nextcloud over HTTPS to never get hacked?

  • effingjoe@kbin.social
    link
    fedilink
    arrow-up
    55
    ·
    edit-2
    1 year ago

    I think many of us are using reverse proxies, and opening port 443 (https) and maybe port 80 (http).

      • Aiden@lemmy.blahaj.zone
        link
        fedilink
        arrow-up
        6
        arrow-down
        1
        ·
        1 year ago

        For lots of things I self host that I wanna expose, I’ll just open a random port like 6952 and then reverse proxy w/ nginx on my web server. Not sure how secure it is, but it works

        • cestvrai@lemm.ee
          link
          fedilink
          English
          arrow-up
          9
          ·
          1 year ago

          Ports are probed and scanned constantly so a random port doesn’t make so much difference. I would use a strict firewall with the server IP whitelisted.

          • fuckwit_mcbumcrumble@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Ever since I moved to a ridiculously high port I haven’t had any access attempts on my server. 6952 won’t do shit, but if you’re between 40000 and 65000 you probably won’t get anything.

            • Retiring@lemmy.ml
              link
              fedilink
              English
              arrow-up
              17
              ·
              1 year ago

              That’s security through obscurity and one should never rely on this strategy alone

              • fuckwit_mcbumcrumble@lemmy.world
                link
                fedilink
                English
                arrow-up
                7
                ·
                1 year ago

                If it’s your only form of security then it’s bad. But if it’s on combination with other measures then it’s a good thing.

                I wouldn’t let anyone who hits my ip/port directly into my openvpn. But not having china and russia bomboarding me with requests is nice.

          • Dandroid@dandroid.app
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            1 year ago

            Can they see what you are hosting on that port, though? Like say I want to open ssh to my server from the internet (I don’t do this and I wouldn’t unless it was temporary), but I don’t want to open it on port 22 because that’s too obvious. Are there bots that just try every protocol until they find one that your server responds to? Or is there a way to dig up information on what is being exposed behind that port?

  • somedaysoon@lemmy.world
    link
    fedilink
    English
    arrow-up
    31
    arrow-down
    2
    ·
    edit-2
    1 year ago

    Unless you need to share/provide services for a public, then you shouldn’t be setting up reverse proxies or cloudflare tunnels in my opinion. All you need is WireGuard for you and the handful of users that might be using it.

    I have two ports open for:

    1. WireGuard

    2. SSH Tunnel

    Both of these services will only accept key based authentication.

    WireGuard is the main way that my wife and me access the services away from home. When our phones disconnect from our home’s SSID, Tasker automatically connects to the WireGuard tunnel so we never lose access to services.

    The SSH tunnel is just a fallback in case I get behind a firewall that might be doing DPI and blocking VPN traffic. The SSH tunnel operates on 443 to hopefully appear to be SSL traffic and allowed through. I’ve used it a very limited amount of times to get out from strict corporate firewalls.

    • Semi-Hemi-Demigod@kbin.social
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      I was able to reduce that to just SSH by having my Wireguard host on a VPS and connecting out from home. Running SSH on 443 is a neat idea.

      • Manifish_Destiny@lemmy.world
        link
        fedilink
        arrow-up
        3
        arrow-down
        2
        ·
        1 year ago

        Running ssh on 443 doesn’t do anything unfortunately. A proper port scan will still detect such a common protocol.

        • Semi-Hemi-Demigod@kbin.social
          link
          fedilink
          arrow-up
          6
          ·
          1 year ago

          It’s more about gaining access from inside a network that doesn’t allow outbound on 22. For the web to work it would need 443 so connecting out on 443 might work

            • somedaysoon@lemmy.world
              link
              fedilink
              arrow-up
              6
              arrow-down
              1
              ·
              edit-2
              1 year ago

              I think you may be still missing the point because it was never implied that the port change is for security; the security is in disabling password authentication and only accepting key based authentication. The reason I put it on 443 is because it is a port that is usually allowed by firewalls and doesn’t get as much attention. So if I am on a network that is blocking access for standard VPN or SSH ports then it might just be enough for me to bypass it. And it’s traffic on a port that is going to see a lot of other encrypted traffic going across it, so it looks more natural then just popping some other random ports that could potentially raise an alarm.

              • Manifish_Destiny@lemmy.world
                link
                fedilink
                arrow-up
                1
                ·
                1 year ago

                I’m not missing any point. It should be clear to people who don’t understand security that running a protocol on a different port doesn’t mean shit for safety. “Because it doesn’t get as much attention” wouldn’t mean anything to any enterprise firewall the moment it’s not an http header.

                • somedaysoon@lemmy.world
                  link
                  fedilink
                  arrow-up
                  1
                  arrow-down
                  1
                  ·
                  edit-2
                  1 year ago

                  You are talking about security when that is not the purpose of it. So yes, you are off on a tangent and missing the point of it.

                  It should be clear to people who don’t understand security that running a protocol on a different port doesn’t mean shit for safety.

                  It is clear, it’s clear to everyone, so why did you randomly interject irrelevant information? Because you incorrectly assumed someone thought it had to do with security… but no one here thought it had anything to do with security. Everyone understood it but for you, and you were corrected not only by me but the other person.

                  Because it doesn’t get as much attention” wouldn’t mean anything to any enterprise firewall the moment it’s not an http header.

                  As I’ve said, I’ve used it a few times to escape firewalls… it works. Will it always work? No, I never made the claim this will bypass all firewalls… the strictest of firewalls will block it, but there are other ways around those firewalls. E.g. proxytunnel, stunnel4

    • witten@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Why not use Wireguard from your phones all the time, even at home? Just performance?

        • witten@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I don’t know about your particular use case, but I’ve found that some apps experience problems when the IP address of a resource they’re using changes out from under them. Like either they experience temporary connectivity issues during the transition or even just stop being able to reach the resource until restarted. However if your setup is working for you, that’s great!

          • a1studmuffin@aussie.zone
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I’m confused why the IP address of a resource is changing for you when you’re moving in/out of the wireguard tunnel? In my setup the LAN IP addresses always stay the same whether I’m on the local network or accessing remotely, It’s just the route to them that changes (over a different ethernet adapter). Perhaps that’s what you meant, or there’s some crazy configs out there I’m unaware of.

            • witten@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              edit-2
              1 year ago

              I fully admit I may be doing this wrong. But in order to connect to a server over Wireguard I’m connecting to it over its Wireguard IP address. (And if I’m not connecting to it over Wireguard I don’t connect to it over a Wireguard IP address.) It’s relevant to note that I’m not using Wireguard as a traditional VPN where all traffic bound for the internet is tunneled over Wireguard. Instead, I’m using it strictly for point-to-point tunneling from a client to one of my servers. In other words, my default routes don’t go to Wireguard. Maybe that’s the difference here?

          • somedaysoon@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            1 year ago

            Yeah, I haven’t had any problems with it, what apps have been an issue for you?

            The app that I use the most during that transitional period would be Ultrasonic which would be streaming music from the Airsonic service as I get in my vehicle and drive away or arrive back home. But even that flawlessly transitions without skipping a beat since it is set to cache songs.

            • witten@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              edit-2
              1 year ago

              The app that comes to mind as having problems with changing IPs is the Home Assistant app. It would simply lose connectivity when the IP changed and never do another DNS lookup to connect again… I always had to restart it. The “solution” for me was not to change IPs and just leave Wireguard on. It’s cool that Ultrasonic handles it though.

              • somedaysoon@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                Interesting, yeah, maybe report it as an issue on github, I use a browser link to my dashboard for Home Assistant instead of the app so it hasn’t happened to me. I almost installed it the other day to get presence detection but decided on another way.

  • I’ve had 22, 80, & 443 open for literal decades. Key auth only on ssh. 80 & 443 rev proxy to inside web services I want to expose only. Also host game servers as needed.

    Keep your stuff up to date and follow best practices for securing it. Use things like crowdstrike. If you can segment your network, go ahead.

    Unless you have a target on your head your main concern is going to be scripts looking for vulnerabilities.

  • spez_@lemmy.world
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    I am not exposing any ports online. I do not trust myself

    Instead, I am using Tailscale (Wireguard)

    • notleigh@aussie.zone
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I’ve got a very similar setup now. Only recently adopted tailscale and was previously port tunnelling over SSH to access anything on the local network. SSH is still open, and am just waiting a bit to see if theres any cases where I need it before closing that out too.

      Short story: If you don’t need stuff open to the general public, just having Tailscale will probably cover you.

  • droidpenguin@lemmy.world
    link
    fedilink
    English
    arrow-up
    12
    ·
    1 year ago

    Ya my paranoia only allows me to expose Wireguard to access everything. I sleep better at night knowing that’s the only thing exposed. Too many instances of major companies getting hacked who have dedicated security teams to manage that. I am one person, learning to manage my own stuff in my free time.

  • Smk@lemmy.ca
    link
    fedilink
    English
    arrow-up
    9
    ·
    1 year ago

    I open 443 and 80 on my router and forward it to a reverse proxy.

    I have a couple of service that are exposed but most of them make sense only when I’m home so I whitelist private IP address on my reverse proxy.

    If you do.your basic security such as updating your servers and services and not having dumb password, you shouldn’t be afraid. Think about it, all of the services that you use is exposed on the internet. I did work for big company and they don’t do much more than what you would probably do, except maybe having some automated monitoring that flag weird stuff. But hey, aside from bots, I don’t think Russian hackers are interested in your stuff. Stay low profile with your exposed things and it’s gonna be alright. Make sure you backup.

  • MaxMouseOCX@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    ·
    1 year ago

    Run your own vpn, and only allow access to your services remotely if they are coming through that vpn.

    Now you’ve shifted some of the security over to how secure your vpn server’s authentication is.

  • notannpc@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    arrow-down
    1
    ·
    edit-2
    1 year ago

    I’ve got a few layers of security for my homelab setup that make me feel pretty comfortable against random attacks.

    Cloudflare is used to manage my domains and act as an external proxy to obscure my IP address, I’ve only forwarded ports 80 and 443 to Traefik my containerized reverse proxy, Authelia to add 2FA to services that I feel should have extra protection and my homelab nodes are on a separate vlan that is configured to drop all attempts to initiate communication outside of that vlan. I also use the ubiquity intrusion detection and prevention features on my firewall to attempt to stop any know malicious activity.

    A majority of these configurations are overkill for a homelab, but were fun to implement. If you use a reverse proxy and keep your software up to date you will likely be fine unless you are specifically targeted by skilled hackers. Any random scans, or shotgun style attacks tend to target unpatched vulnerabilities.

  • Manifish_Destiny@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    arrow-down
    2
    ·
    1 year ago

    https, wireguard and mumble.

    Just set up shodan monitoring, use burpsuite or owasp zap, and check your pcap files for accidental plaintext.

    Also ssllabs has a nice website checker.

    And get a NGFW

    • ZenArtist@kbin.social
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Everything except https and wireguard went above my head. Do you have some sort of guide/writeup that you can point to for integrating all this?

      • Awwab@kbin.social
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Shodan is a internet scanning website, it can monitor your IP for new ports open and some basic vulnerability stuff.

        Burpsuite is a tool to capture network traffic, they are saying they use it to confirm all their services use end to end encryption for communication.

        NGFW is next gen firewall and it’s just a firewall that’s able to do more than your basic in/out rules.

  • Bristlerock@kbin.social
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    Exposed is the right term. Other than my Wireguard VPN port, everything I have exposed is HTTPS behind Authelia MFA and SWAG.

    I’m tempted to switch Wireguard for Tailscale, as the level of logging with WG has always bothered me. Maybe one day.

  • redballooon@lemm.ee
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    I did for a while, but it never felt right.

    I’m also lazy a f, so I purchased a new router that comes with WireGuard VPN and that works well enough with our iPhones.