Hello everyone,

I am currently setting up moonlight game streaming from my Windows 11 PC over GeForce Experience to my retroid Pocket 3+ (Android).

Does someone here know if it is possible to deactivate the PIN when connecting from client to host? (Using it only in my own network, not over internet).

Thanks in advance for your help!

  • Skiptrace@lemmy.one
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    You cannot disable the Moonlight Authorization Pin. It should simply allow you to put it in and never ask for it a second time.

    • Gorroth@feddit.deOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      too bad… It’s asking me everytime after booting up. So I have to interact with my PC everytime. Without it I could just simply power on AC (using a smart plug) and auto log in to windows and then connect moonlight.

      • Skiptrace@lemmy.one
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Oh, just leave your PC on overnight then. It’s a security thing to have to input the Pin. Also, just remote desktop into your PC, and enter the Pin that way if you absolutely want to turn your PC off overnight.

        If it’s a power draw concern, it probably uses less than 40w of power at idle.

        • russjr08@outpost.zeuslink.net
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Especially if you were to use sleep mode on the PC - then depending on your setup you can combine that with Wake-on-LAN and then just use another app on your phone/streaming device to send the “magic packet” to initialize a wake up.

          I’m not familiar with Moonlight, but I’d imagine that would prevent it from asking for a pin again as well.

          • Gorroth@feddit.deOP
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            My Mainboard can do WOL, but I have no Ethernet cable connected (simply not possible, because router is too far away). WLAN Card doesn’t support it. Also not going to let it in sleep mode. Configured turn on AC on my Mainboard, so PC turns on when Smart Plug is activated. Maybe will go with RDP if there is no other option. But will have to try if PIN gets still asked. Someone said it should only ask one time, maybe I did something wrong.

        • Gorroth@feddit.deOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          No power drain concern, just don’t like it to let electronic devices running when not needed. Already thought about RDP, maybe that’s going to be my option

          • Skiptrace@lemmy.one
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Power Cycling your PC will end up causing more harm than good because your putting extra stress for every startup.

            • Gorroth@feddit.deOP
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              I am father. The times I start my PC up in one year can be counted on two hands. I think I’m good :D But thanks for your warning, might be helpful for other people considering my solution ;)