…being in nursing school is giving me a strong hatred for the imperial system.
The doctor ordered 35mg/kg Watdafuqenol IV QID. Available is a 2’ by 15" section of torn out carpet soaked in spilled Watdafuqenol; when wrung out into the patient’s left shoe, you get 97 chipmunk-mouthfuls diluted to a concentration of 24 Watdafuqenol to 1 toe jam. How many shot glasses full do you administer?
You might’ve already seen this, but try using the method of dimensional analysis where you work backwards on a single line and you’ll never get one of those problems wrong again.
The key is just working backwards by units using the equations you have available. I know somebody that only got one of the questions on his MCAT correct bc he used this method lol.
Even dimensional analysis works best with metric because sometimes you need to convert units and almost all conversion in metric are base 10, so something like 1kg/km is 1000g/1000m is 1 gram per meter. But in imperial 1 pound/mile is 16 ounces / 5280 feet is who the fuck knows how many ounces per feet.
I use dimensional analysis, but it’s over two lines… and not sure what you mean by working backwards, since the order doesn’t really matter so long as every value is in the correct line.
Since typing it out would be ugly as sin, example image stolen from google:
…they like to give us things like pt weight in lbs and oz, and ask for final product of tablespoons or some shit cuz they enjoy wasting our time, lol.
That the type you mean?
I know there are a few different ways to crunch the numbers, but DA is my favorite so far cuz it’s so consistent.
*edit, example pic changed, first one put mcg twice in the same line, which is a weird move. /shrug
Gotcha! Yeah same page - some of the other students don’t like that method cuz it can take a bit longer, but building the equation kinda idiot proofs itself against calculating for the wrong unit, and it’s super consistent! Definitely my favorite so far.
Psi is used a lot in engineering. But honestly, pressure units are a bit of a mess. The metric unit is a Pascal, which is fundamentally defined as a Newton per square meter – unsurprisingly, that is an incredibly small quantity of pressure. It’s roughly 101,500 Pascals for standard atmospheric pressure. You’ll typically see pressure written in either kPa, MPa, or bars (1E5 Pascals) within a metric framework. For perspective, it’s 14.7 psi (lbs per square inch) for an atmosphere.
And personally, I think all of these are pretty silly when we could be using 1 atm instead, which is literally defined as standard atmospheric pressure. It’s a much easier way to visualize and intuitively grasp pressures.
BTU is another fun one. It’s the energy needed to raise 1 lb of water by 1 degF. Calorie is the energy to raise 1 g of water by 1 degC. Both are very pragmatic definitions and have a degree of intuition. Then they’re the metric unit, the Joule, which suffers from the same issue as Pascal. It’s the work done by a 1 Newton force pushing an object 1 meter. Once again, pretty small.
Until you start looking at old stuff and have you figure out if they were working with the “millions scheme” or “thousands scheme,” and if “1 billion” is equal to 1012 or 109
99% of it is metric. I think the biggest outlier is home care, where you go visit some grandma who’s actively offended by metric, so if you tell her to take 7.5mL of something she’ll just do the deer in the headlights thing, then shove the bottle up her ass.
Tell her instead that she needs to take 3 Mountain Dew caps full and suddenly she can follow instructions enough to not kill herself.
I know it should be obvious and maybe I missed the sarcasm, but the teaspoon unit is in no way the same as an actual teaspoon utensil. I also don’t use my own feet to measure length.
It works fine when everything around you is in those numbers. The scale for medications might be set to mg, or injections in mL. The bottles for both are labeled the same way. Everything works together, and you don’t really have to think about it.
Part of the problem with converting everything to metric is it really needs to be everything. You can try talking about driving distances in km, and your gas tank in L/100km, and your speed in km/hr. However, the interstate highway signs will still be in miles, you buy gas in gallons, and the speed limit signs are in mph. This isn’t a case where you can just choose to use the metric system as an individual, because the whole system works against you.
That is understandable, I was surprised that metric is actually used somewhere. Use in pharmacy also explains why in Hollywood stoner comedies they used grams, which always confused me.
It’s used all over the place in the US. It’s usually a weird, thoughtless mixture. Milk is sold in gallons, soda is sold in liters.
In fact, you’ll find exceptions in most countries once you start looking for them. Just a matter of how prevalent the metric system is; nobody is 100%. Most common exception is car tires because of how industry standards work.
You’ll never see dosage questions like that on the NCLEX. If you do it’ll be like one. I breezed through it when I took it, but basic knowledge questions are minimal (as long as you don’t get them wrong).
…being in nursing school is giving me a strong hatred for the imperial system.
The doctor ordered 35mg/kg Watdafuqenol IV QID. Available is a 2’ by 15" section of torn out carpet soaked in spilled Watdafuqenol; when wrung out into the patient’s left shoe, you get 97 chipmunk-mouthfuls diluted to a concentration of 24 Watdafuqenol to 1 toe jam. How many shot glasses full do you administer?
That’s a trick question. How many pound-feet of torque did you apply to the carpet?
1.15 pallets of spent 12-gauge casings over over the course of 2.3 standard breakfasts.
Uhhh 6? Ish?
Don’t forget to round to the nearest liquor store!
Yea I need a drink
You might’ve already seen this, but try using the method of dimensional analysis where you work backwards on a single line and you’ll never get one of those problems wrong again.
The key is just working backwards by units using the equations you have available. I know somebody that only got one of the questions on his MCAT correct bc he used this method lol.
Even dimensional analysis works best with metric because sometimes you need to convert units and almost all conversion in metric are base 10, so something like 1kg/km is 1000g/1000m is 1 gram per meter. But in imperial 1 pound/mile is 16 ounces / 5280 feet is who the fuck knows how many ounces per feet.
I use dimensional analysis, but it’s over two lines… and not sure what you mean by working backwards, since the order doesn’t really matter so long as every value is in the correct line.
Since typing it out would be ugly as sin, example image stolen from google:
…they like to give us things like pt weight in lbs and oz, and ask for final product of tablespoons or some shit cuz they enjoy wasting our time, lol.
That the type you mean?
I know there are a few different ways to crunch the numbers, but DA is my favorite so far cuz it’s so consistent.
*edit, example pic changed, first one put mcg twice in the same line, which is a weird move. /shrug
Hopefully you can read my chicken scratch lol
Gotcha! Yeah same page - some of the other students don’t like that method cuz it can take a bit longer, but building the equation kinda idiot proofs itself against calculating for the wrong unit, and it’s super consistent! Definitely my favorite so far.
So USAnian drugs are in metric units? I hope in actual work nurses get to use a phone app or something because this asks for mistakes
Even in the US, science is mostly metric. But most US people are not exactly the scientific kind…
Modern science is, but there’s plenty of old journals from the 80s and earlier that use degrees Rankine and gallons.
Fucking BTUs and shit.
PSI is another one that seems to be used over the metric/SI alternative in some science-adjacent applications.
Psi is used a lot in engineering. But honestly, pressure units are a bit of a mess. The metric unit is a Pascal, which is fundamentally defined as a Newton per square meter – unsurprisingly, that is an incredibly small quantity of pressure. It’s roughly 101,500 Pascals for standard atmospheric pressure. You’ll typically see pressure written in either kPa, MPa, or bars (1E5 Pascals) within a metric framework. For perspective, it’s 14.7 psi (lbs per square inch) for an atmosphere.
And personally, I think all of these are pretty silly when we could be using 1 atm instead, which is literally defined as standard atmospheric pressure. It’s a much easier way to visualize and intuitively grasp pressures.
BTU is another fun one. It’s the energy needed to raise 1 lb of water by 1 degF. Calorie is the energy to raise 1 g of water by 1 degC. Both are very pragmatic definitions and have a degree of intuition. Then they’re the metric unit, the Joule, which suffers from the same issue as Pascal. It’s the work done by a 1 Newton force pushing an object 1 meter. Once again, pretty small.
Until you start looking at old stuff and have you figure out if they were working with the “millions scheme” or “thousands scheme,” and if “1 billion” is equal to 1012 or 109
https://www.affixes.org/numberwords.html
That’s why you have methods of writing like 10x.
99% of it is metric. I think the biggest outlier is home care, where you go visit some grandma who’s actively offended by metric, so if you tell her to take 7.5mL of something she’ll just do the deer in the headlights thing, then shove the bottle up her ass.
Tell her instead that she needs to take 3 Mountain Dew caps full and suddenly she can follow instructions enough to not kill herself.
Then she shoves the Mountain Dew bottle up her ass.
Yeah but that’s for pleasure.
“Doo the Dew!”
I thought everything is bigger across the ocean but your Mountain Dew caps are tiny over there! ;)
Just googled it and apparently they’re about 5mL each. Apparently I’m not great at eyeballing volume.
Add it to the pile of conversion failures between metric and imperial.
Yeah, 5ml is a teaspoon, but I’m not sure if it’s reasonable to assume teaspoons have similar sizes across countries.
But after your first month in the job you’ll convert and eyeball it even when half asleep :)
I know it should be obvious and maybe I missed the sarcasm, but the teaspoon unit is in no way the same as an actual teaspoon utensil. I also don’t use my own feet to measure length.
It works fine when everything around you is in those numbers. The scale for medications might be set to mg, or injections in mL. The bottles for both are labeled the same way. Everything works together, and you don’t really have to think about it.
Part of the problem with converting everything to metric is it really needs to be everything. You can try talking about driving distances in km, and your gas tank in L/100km, and your speed in km/hr. However, the interstate highway signs will still be in miles, you buy gas in gallons, and the speed limit signs are in mph. This isn’t a case where you can just choose to use the metric system as an individual, because the whole system works against you.
That is understandable, I was surprised that metric is actually used somewhere. Use in pharmacy also explains why in Hollywood stoner comedies they used grams, which always confused me.
It’s used all over the place in the US. It’s usually a weird, thoughtless mixture. Milk is sold in gallons, soda is sold in liters.
In fact, you’ll find exceptions in most countries once you start looking for them. Just a matter of how prevalent the metric system is; nobody is 100%. Most common exception is car tires because of how industry standards work.
You’ll never see dosage questions like that on the NCLEX. If you do it’ll be like one. I breezed through it when I took it, but basic knowledge questions are minimal (as long as you don’t get them wrong).
I love how much nursing advice I’m getting in a thread about melting Russian invaders. ^_^