For appliances at least, 95% of “the manual” today is useless CYA safety disclosures in 17 different languages. Manuals today rarely contain useful information.
Yep. I needed the circuit diagram for my microwave to fix an issue with the light (kept blowing out bulbs rapidly). Turned out you have to pull it out of the top inner frame, after unscrewing the button board and top panel. Thankfully, was an easy soldering fix, thyristor blew.
Until you do like step one of taking an appliance apart, and realize that the real manual is marked “for technician use only”, and it’s hidden inside of the appliance.
My washer and dryer both have good manuals complete with circuit diagrams under the top once i take a few screws out. My chest freezer has one taped up under the hatch where the compresser sits. My refrigerator has one hidden in the door hinge.
Yeah, my parents were about to throw out an oven that would keep shutting off. I pull it away from the wall and boom, wiring diagram. Take out the ohm meter, figure out that the resistance across the temperature probe went to near zero when steam intruded through a gap in the crimp. 5 dollar part and it was good to go for years to come (the new part was crimped in a simpler, more robust way).
Honestly I have to disagree. All my recently purchased appliances: microwave, washing machine, dishwasher and induction cooktop, had detailed instruction manuals that were genuinely useful, especially where the finer details aren’t obvious from the device itself.
Heck, even my wireless earbuds had a little bit of useful info, like how to force them into pairing mode.
Of course, all those manuals contained those nonsense safety warnings too (and I read every word of course! :P) but that’s neither here nor there.
All those safety warnings are useless nonsense, until:
This vacuum is not water resistant and no part of it shall come into contact with water. Do not operate this vacuum on wet floors.
Wash the infuser with water or coffee machine cleaning powder only. Do not wash with soap. Every 6 months, relubricate the seals with food and water safe silicone grease certified with NSF/ANSI/CAN 61 and NSF/ANSI 51.
The troubleshooting section of the manual is almost always useless because it only ever covers user error.
My washer threw a drainage error and the manual suggested I blocked the outlet or had done something daft. I looked up the error code online and 90% of the time it was a failed water pump.
I had to replace the water pump. It was an easy job that required less documentation than a lego set for a 5 year old. You just had to know which screws to loosen to get to the pump. Was it documented? Of course not.
For appliances at least, 95% of “the manual” today is useless CYA safety disclosures in 17 different languages. Manuals today rarely contain useful information.
The actual manual is usually hidden somewhere on it for repair techs to find. For my oven it was taped on the back.
Yep. I needed the circuit diagram for my microwave to fix an issue with the light (kept blowing out bulbs rapidly). Turned out you have to pull it out of the top inner frame, after unscrewing the button board and top panel. Thankfully, was an easy soldering fix, thyristor blew.
Until you do like step one of taking an appliance apart, and realize that the real manual is marked “for technician use only”, and it’s hidden inside of the appliance.
My washer and dryer both have good manuals complete with circuit diagrams under the top once i take a few screws out. My chest freezer has one taped up under the hatch where the compresser sits. My refrigerator has one hidden in the door hinge.
That or Google “<model> service manual”
Yeah, my parents were about to throw out an oven that would keep shutting off. I pull it away from the wall and boom, wiring diagram. Take out the ohm meter, figure out that the resistance across the temperature probe went to near zero when steam intruded through a gap in the crimp. 5 dollar part and it was good to go for years to come (the new part was crimped in a simpler, more robust way).
Dishwasher had the service manual taped to the kick plate. It gave me codes to troubleshoot, finding the heating element died.
Yup, just got done wiring up an old washer to turn it into a feather plucker using the technician only manual!
Appliance repair in the 20’s? WTFY (Watch the fucking Youtube)
query:samsung Ice maker stoped working
Hi, I’m jimmy from shadyApplianceParts.com Did your samsung ice box stop making ice? That’s a common problem. What you need to…
Honestly I have to disagree. All my recently purchased appliances: microwave, washing machine, dishwasher and induction cooktop, had detailed instruction manuals that were genuinely useful, especially where the finer details aren’t obvious from the device itself.
Heck, even my wireless earbuds had a little bit of useful info, like how to force them into pairing mode.
Of course, all those manuals contained those nonsense safety warnings too (and I read every word of course! :P) but that’s neither here nor there.
All those safety warnings are useless nonsense, until:
Well, good to know.
And software doesn’t even come with those kinds of manuals anymore.
The troubleshooting section of the manual is almost always useless because it only ever covers user error.
My washer threw a drainage error and the manual suggested I blocked the outlet or had done something daft. I looked up the error code online and 90% of the time it was a failed water pump.
I had to replace the water pump. It was an easy job that required less documentation than a lego set for a 5 year old. You just had to know which screws to loosen to get to the pump. Was it documented? Of course not.
Leno on the lost are of Owner’s Manuals.