I kept burning my food or wait forever for the pan to heat up and I finally understand why. Each knob has a different direction for the Hi and Lo (also why isn’t it Low).

        • Wrench@lemmy.world
          link
          fedilink
          English
          arrow-up
          43
          ·
          1 year ago

          Their target audiences are home flippers who just need the cheapest stainless steel appliances that look fine at a glance, and cheap landlords that don’t understand that they’re choosing themselves more money in the long run.

          • danielton@lemmy.world
            link
            fedilink
            English
            arrow-up
            13
            ·
            edit-2
            1 year ago

            I don’t get how this would be cheaper to manufacture. They’d need to make five different switches.

            • Lev_Astov@lemmy.world
              link
              fedilink
              English
              arrow-up
              14
              ·
              1 year ago

              By knobs, you mean rotary switches, I assume. I think the thing is they cheaped out by not designing the switches they needed. Instead they just sourced whatever rotary switches they could find that had the number of outputs they needed for these weird, segmented burners, regardless of their potentiometer directions.

      • Daqu@feddit.de
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        They had different teams working on each knob to speed up the design process.

        • LazaroFlim@lemmy.filmOP
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          Everything Samsung is bad (except some phones). TV are cripples with ads, fridges, there’s a whole sub about how bad they are… and so on.

          • Flying Squid@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Just wait until they start charging subscription fees for appliance features. Believe me, that’s coming.

            • LazaroFlim@lemmy.filmOP
              link
              fedilink
              English
              arrow-up
              3
              ·
              1 year ago

              OMG I just had a vision of a future where cooking recipes had DRM. “Chicken detected. In order to cook your chicken to the right temperature, you need a delicious home food subscription. Tap on the top left burner to subscribe” also the burner is on.

    • Tuss@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Technically they can use their picture as reference and maybe order a sticker with the settings printed.

  • sndmn@lemmy.ca
    link
    fedilink
    English
    arrow-up
    123
    arrow-down
    8
    ·
    1 year ago

    My dryer has a “less dry” setting.

    Who likes their laundry done rare?

  • Pandantic@kbin.social
    link
    fedilink
    arrow-up
    52
    ·
    1 year ago

    It’s like your stove top was the experimental test one where you could see how all the knob styles worked, like it wasn’t supposed to be released to the public.

  • intensely_human@lemm.ee
    link
    fedilink
    English
    arrow-up
    33
    ·
    1 year ago

    You have double burners. Some of your knobs have two HI and two LO positions, one for one burner and one for both burners.

    On top of the stove this looks like two concentric heating elements. You can turn on one or both. Turning on both is sometimes called a “fast boil” burner.

    The best solution the industry has come up with is to put two control surfaces into one knob, so instead of the control surface being a full circle it’s a half circle.

    There’s no way to make all the knobs match in appearance unless all the burners have optional double burner operation.

    source: am appliance salesman.

    • LazaroFlim@lemmy.filmOP
      link
      fedilink
      English
      arrow-up
      12
      arrow-down
      1
      ·
      1 year ago

      Yes they’re double burners but the Lo -> Hi rotation is different for each position which is infuriating, but only mildly.

      • intensely_human@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I see what you mean.

        What they should do is make the rule: “clockwise is hotter”, and make all the LO…HI arcs increase in the clockwise direction.

        Then no matter which burner you’re adjusting, you know it’s a clockwise movement.

        They should also have a little LED light bar that changes length to show how high that burner’s setting. As you turn clockwise, it lengthens toward “full on”.

        The LED light bar should light up whenever a knob is touched.

        Need high temp LEDs too I guess.

    • johnthebeboptist@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      My folks had a stove with two (electric) heat elements in the same way I assume OP has, to use both, you had to go 360° all the way to a full circle where it “clicked”, then go back to where you wanted it at. Much easier and sensible IMO than whatever the hell this headache is.

  • Kushan@lemmy.world
    link
    fedilink
    English
    arrow-up
    32
    ·
    edit-2
    1 year ago

    I’m really trying to understand what’s going on here in a way that makes sense, even if it’s a twisted kind of sense.

    My best guess is that each of these burners are a different size and some have multiple rings and that by turning the knob left (Anti-clockwise), you’re going from smaller number of rings to larger number of rings - however, the rings start at their highest heat level. So looking at the bottom right dial as an example, the first “Notch” on the left is the smallest burner on the highest setting, then as you turn left more, it’ll dial down that burner until you get to the second ring on the burner - starting at full power for that second burner and continuing to lower power until you get to the 3rd ring, then it’s same again for the 4th ring.

    Is that right? am I even close? I don’t understand why you’d go from smallest burner to highest burner anti-clockwise, but go from lowest burner-power to highest clockwise. That still doesn’t make sense to me.

    • dual_sport_dork 🐧🗡️@lemmy.world
      link
      fedilink
      English
      arrow-up
      30
      arrow-down
      1
      ·
      edit-2
      1 year ago

      That’s pretty much exactly how it is.

      OP’s stove is GCRE3060AF, or similar. The rightmost knob is inconsistent for reasons I cannot fathom, unless there is some obscure electrical reason. It is an electric stove, and the knobs with multiple ranges do indeed control burners that have multiple potential sizes. One of them has two selectable sizes, and other has three. On these I believe the rationale is that the high setting is the closest and most easily accessible because radiant electric ranges suck [citation not needed] and since they take forever and a day to heat up most users will just leap right to the full blast output setting immediately. I have no idea why the direction on the last knob is backwards from the others, clockwise versus counterclockwise, but it is.

      If you’re morbidly curious, you can view the entire control panel from OP’s stove (or one similar) here.

          • june@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            I can’t decide if I prefer this (my stove is this way) or bumping the knobs with my hips.

            • AlligatorBlizzard@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              My stove has the front knobs, it’s gas, and it’s been bumped on accidentally more than once and someone else walks into the kitchen and has the horrifying realization that the kitchen smells like gas. I think I prefer the electric stove I had as a kid.

              • ThatBaldFella@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 year ago

                That’s why modern gas stoves have safety valves. There’s a temp sensor near the burner which automatically shuts the gas off if the burner isn’t lit.

            • papabobolious@feddit.nu
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              Well that’s fair and relatable. My kid keeps turning on the oven and turning off the dishwasher. Our stove has touch controls on the surface that he hasn’t figured out quite yet, but since it’s an induction stove it turns off pretty quickly if nothing is on it.

              • LazaroFlim@lemmy.filmOP
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 year ago

                Our dishwasher has buttons on the i side. You need to open the door to control it. Then when you close it it looks clean with no buttons.

      • LazaroFlim@lemmy.filmOP
        link
        fedilink
        English
        arrow-up
        13
        ·
        1 year ago

        Yep. It’s. GCRE3060AFF electric stove. (Other thing I hate is the fan noise when the oven is on, even when not on convection). Your idea of Hi closest to off position makes sense except of that triple knob, the 3rd ring Hi position isn’t at the top.

        • BarqsHasBite@lemmy.ca
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Have you Google the fan being on all the time? Ours (different model) doesn’t do that and they really shouldn’t.

          • warling@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            It has to do with keeping the internal circuit boards cool so they don’t overheat due to the heat from the oven. We had a stove that did that too. I hated that thing. It would roar like a jet engine for about 30 minutes even after you turned the oven off.

            • Heisl@feddit.de
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              US kitchen appliances are so weird and bad. I don’t get why your stuff doesn’t progress like over here in EU. We get the cleanest, modern, most silent kitchen setups ever.

              • LazaroFlim@lemmy.filmOP
                link
                fedilink
                English
                arrow-up
                3
                ·
                1 year ago

                Because you can make a larger profit by keeping the same design and parts on a crap product and charge you an inflated premium vs selling you a good product with decent R&D and testing. If it’s all crap you can’t tell you’re being fucked. Same thing with sliding guillotinée windows and health insurance.

        • LazaroFlim@lemmy.filmOP
          link
          fedilink
          English
          arrow-up
          4
          ·
          1 year ago

          I’m sure there’s a lazy engineer reason. But as someone who does engineering semi-professionally, come on! You don’t skimp out on UX just because it’s easier to make it this way! There is a reason why Murphy’s Law exists! And in this case it’s actually a fire hazard!

          • intensely_human@lemm.ee
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            As a UX designer who became an appliance salesman, I challenge you to invent better UX for these features.

            • LazaroFlim@lemmy.filmOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Well, for starter. Pick a direction for Lo -> Hi either clockwise or counterclockwise and stick to it.

              The rotating knob is great. Haptic feedback. You can see it’s off at a clan r from afar. It’s not an encoder but a potentiometer so each position always has the same function hard coded. Just make them all turn in the same direction.

              I would chose counter-clockwise as it’s easier to turn it that way for a right handed person (and that’s how the single burners are designed, all 3 of them (although the warm zone has a weird dead zone for some reason). Start on Lo until it gets to Hi then for multiple ring ones when you hit ring_1 hi and continue you get to ring_2 Lo and so on.

    • LazaroFlim@lemmy.filmOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Yes they’re rings. Still doesn’t explain why not everything is in the same rotational direction.

    • scutiger@lemmy.world
      link
      fedilink
      English
      arrow-up
      32
      ·
      edit-2
      1 year ago

      The burner has two zones. A small one in the middle, and a wider ring around. If you turn to the left, you only turn the middle part on from High to low, and if you turn right, you turn both on from low to high.

      • scottywh@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Damnit… Great explanation… Also, it just pissed me off because it reminded me that I have a burner on my stove like this with the small and large and different settings for each… Unfortunately, it currently only works at all on the large burner on high… I need to slide it away from the wall and take the fucking thing apart and figure out why…

        Not tonight though… 😂

    • june@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      arrow-down
      2
      ·
      1 year ago

      Has to do with the fact that several burners have multiple sizes that can be used. My stove is the same way, and there’s really not a much better way to do it imo, short of a touch screen, which I don’t want on a stove.

      • Hildegarde@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        A dial with a mode select switch directly above it. That us the much better way.

        If you want the inner burner at power level 6, you set the mode switch to inner and the dial to 6. Then every dial can work the exact same way, but you still have multi-sized burners.

      • Buddahriffic@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I like the other commenter’s idea, but I’d be happy with just consistent directions. Turn it a little bit counterclockwise and it’s the minimum low, turn it a bit clockwise and it’s max high.

        I have an LG one with a single triple burner that doesn’t match any of the others. The oven also sucks, I need to set it 25 degrees higher on convection (with normal cook time) for things to cook properly.

        Oh and then there’s the bottom drawer which is a second oven but it takes forever to preheat. I’ve used it twice and then stopped bothering.

        I think I’ll replace that piece of shit next time a big purchase is up.

  • spongebue@lemmy.world
    link
    fedilink
    English
    arrow-up
    25
    ·
    1 year ago

    I can explain this one! When the knob only has one set of hi/lo, it controls the burner’s heat as you’d expect, and it all works in the same direction. Those with multiple hi/lo sets control the heat and the size of the burner, since there are 2 (and on one, maybe 3?) concentric heating elements available for that knob.

    I’ve had something similar for years, and have never had an issue. I’m even less likely to accidentally choose the wrong knob since the single-size one tends to have a looser feel to it.

      • muzzle@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        It took me about a minute to figure the same, before reading the comment, and I never had a multi element burner.

        Maybe OP, you, and a lot of other people in the thread are being a bit overdramatic?

    • TheDoctorDonna@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      This explains the circle symbols beside each “lo” on the multi-knobs. That’s pretty clever once you get used to it.

    • LazaroFlim@lemmy.filmOP
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      3
      ·
      1 year ago

      The issue is the direction of the Hi Lo. One it’s clockwise the other counter and the other it depends on which burner size you want.

      Yes they’re rings one double and one triple.

          • spongebue@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            There are two knobs that control burners with multiple sizes. One of them, like mine, controls two sizes. You can turn either direction to control the burner size you want, and it’ll go high to low regardless. The other has three burner sizes. There is no third way to turn a knob, so they needed a different approach.

    • KreekyBonez@lemm.ee
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      1 year ago

      nice features, albeit highly situational, and probably useless for most home cooks. I imagine R&D needed something new for the model and over-engineered it.